Brother 882-W33, Руководство по эксплуатации

Страница: 127 / 216

SEWING THE STITCHES
U
tili
ty Stit
ch
es
125
3
Basting
a
Select and attach presser foot “J”.
b
If desired, keep pressing the “Reverse
Stitch” button or the “Reinforcement
Stitch” button to sew 4 stitches of
reinforcement stitches, then press “Start/
Stop” button to continue sewing.
c
Sew while keeping the fabric straight.
d
If desired, end the basting with
reinforcement stitches.
■
Free-Motion Basting
When the feed dogs are lowered, basting can be
sewn while freely moving the fabric.
a
Select .

The presser foot is raised to the height necessary for
free-motion sewing, and the feed dogs are lowered.
b
If desired, keep pressing the “Reverse
Stitch” button or the “Reinforcement
Stitch” button to sew 4 stitches of
reinforcement stitches.
c
Press the “Start/Stop” button to start
sewing.
Sew while moving the fabric when the needle is
raised.
d
If desired, end the basting with
reinforcement stitches.
Memo
• If the basting threads fall out of the fabric, pull
up the bobbin thread before sewing, and then
pull the upper thread and bobbin thread under
the presser foot toward the back of the
machine. Hold the upper thread and bobbin
thread when beginning to sew, and when
finished sewing, cut the threads leaving an
excess amount of thread. Finally, hold the
upper thread and bobbin thread at the
beginning of the stitching while arranging the
fabric.
• When you use the basting stitch for gathering,
do not use a reinforcement stitch at the
beginning; you should lift the presser foot,
rotate the handwheel toward you
(counterclockwise), pull up the bobbin thread
and pull a length of top and bobbin thread out
from the rear of the machine.
• Stitching will be sewn with a length of 5 mm
(approx. 3/16 inch).
a
5 mm (approx. 3/16 inch)
Memo
• If the side pedal of the multi-function foot
controller is set to [Single Stitch], basting can
be sewn by using the side pedal to sew each
single stitch. For details on specifying settings
for the multi-function foot controller, refer to
“Using Advanced Multi-Function Foot
Controller” on page 63.
• The green light on the right of the
“Reinforcement Stitch” button lights up while
reinforcement stitching.
• The sewing speed is limited up to 100 spm.