Brother 882-W33, Руководство по эксплуатации

Страница: 108 / 216

SEWING THE STITCHES
106
■
Overcasting
Use this stitch to sew overcasting on the edge of
stretch fabrics. Sew the overcasting along the edge
of the fabric while positioning the right-hand side
needle drop point just outside the edge of the fabric.
Overcasting
Use for the edge of seams in skirts or trousers, and
the edge of all cuttings.
■
Overcasting Using Presser Foot “G”
a
Select a stitch and attach presser foot “G”.
b
Lower the presser foot so that the presser
foot guide is set flush against the edge of the
fabric.
c
Rotate the handwheel toward you
(counterclockwise).
Check that the needle does not touch the
presser foot.
a
The needle should not touch the center bar
d
Sew along the presser foot guide.
a Guide
e
Press the “Start/Stop” button to stop sewing
when you are finished, and raise the presser
foot and needle to remove the fabric by
pulling it back.
Stitch Stitch name Presser foot
Overcasting stitch
Overcasting stitch
Overcasting stitch
CAUTION
• When using overcasting foot “G”, be sure to
select a stitch that can be used with
overcasting foot “G”. If you sew with the
incorrect stitch, the needle may strike the
presser foot and break, and may cause injury.
IMPORTANT
• Pull the fabric to the back of the machine after
finished sewing. By pulling the fabric to the
front or side, the center bar of the presser foot
“G” may break.
a
Center bar
• If thread is tangled on the presser foot, remove
the entangled thread, and then raise the
presser foot lever to remove the presser foot. If
the presser foot is raised while entangled with
thread, the presser foot may be damaged.