Brother 882-W33, Руководство по эксплуатации

Страница: 129 / 216

SEWING THE STITCHES
U
tili
ty Stit
ch
es
127
3
e
Pass the yarn through the telescopic thread
guide and the yarn guide (
1
) to (
2
).
f
Thread the yarn through the couching dual
feed foot.
Pass the yarn through the loop in the yarn
threader, and then pass the threader from
top to bottom through the hole on the
couching dual feed foot.
g
Attach the couching dual feed foot shown
below to the compact dual feed foot.
h
Pull out the yarn for about 10 cm (4 inches)
to the back of the machine.
i
Touch to unlock all keys and buttons.
j
Thread the machine with the upper thread.
■
Sewing Zigzag Couching
a
Select (Stitch Pattern 1-10).
b
Measure the width of the yarn and set the
stitch width according to the width of the
yarn.
c
Rotate the handwheel to set the needle in
the sewing start position. Start sewing on
the right side of the yarn.
d
Make sure that the yarn passes straight
through the channel in the back of the
couching dual feed foot, and then lower the
presser foot.
a Channel
Note
• Make sure that the yarn does not become
entangled as you work.
Note
• Do not use the spool stand for upper thread.
Otherwise thread may tangle with yarn.
1
2
Note
• Make sure that there is enough width to wrap
over the yarn.
• You can adjust the stitch width while checking
the camera view. Refer to “Checking the
Needle Location in the Screen” on page 79.
a Zigzag stitch
b
Yarn
Note
• Pull off an appropriate amount of yarn from
the ball or skein so the yarn does not become
taut.