Brother 882-W33, Руководство по эксплуатации

Страница: 120 / 216

SEWING THE STITCHES
118
i
Slide the item that you wish to sew onto the
free arm and make sure that the fabric feeds
correctly.
a Free arm
j
Position the fabric with the edge of the
folded hem against the guide of the presser
foot, and then lower the presser foot lever.
a Wrong side of fabric
b
Fold of hem
c Guide
k
Adjust the stitch width until the needle
slightly catches the fold of the hem.
a Needle drop point
When you change the needle drop point, raise the
needle, and then change the stitch width. (The stitch
width setting is in neither millimeters nor inches.)
a Thick fabric
b
Normal fabric
c Touch to move the needle drop point to the right, if
the needle catches too much of the fold.
d
Touch to move the needle drop point to the left, if
the needle does not catch the fold.
l
Sew with the fold of the hem against the
presser foot guide.
* We recommend to stitch reinforcement stitches at
the beginning and end of the hem.
m
Press the “Start/Stop” button to stop sewing
when you are finished, and raise the presser
foot and needle to pull the fabric under the
presser foot towards the back of the
machine.
n
Remove the basting stitching and reverse
the fabric.
a
Wrong side of fabric
b Right side of fabric
Memo
• Blind hem stitches cannot be sewn if the left
needle drop point does not catch the fold. If
the needle catches too much of the fold, the
fabric cannot be unfolded and the seam
appearing on the right side of the fabric will be
very large, leaving an unattractive finish.
IMPORTANT
• Be sure to pull the fabric towards the back of
the machine after sewing. If you pull the fabric
toward side or forward, the presser foot may
be damaged.
a
b
c d
1
2