200747_1TB
10
Assembly – Decorative Log Retainer
Using the 2 off M5 C/Sunk Bolts provided, locate the decorative trim behind the stove
opening as shown and secure in position.
Assembly - Fitting TTB sensor
With the burner installed, thread the TTB cable from the
interrupter/ splitter to the rear of the stove.
The TTB sensor
will be soldered to the cable and already mounted onto the
bracket pictured left
. Attach the bracket to rear panel of the
stove by inserting the keyhole cut-outs over the existing screw
heads and drop down to final position. Tighten screws if
required. Ensure the white fibre is between the stove and
bracket
TTB sensor (located
just below the rear
flue outlet).
This will
be soldered to the
TTB cable
TTB Connection
Cable
Interrupter
Thermo
Couple
To Gas Valve
TTB
Connection
Cable
Interrupter
Interrupter
TTB
Thermo-couple
TTB sensor (located just
below the rear flue outlet).
This will be soldered to the
TTB connection cable
To Gas
Valve
Gas Valve