QmB Series IP40, IP65, IP65XP
Section 1 Introduction
1-1
Installation and Operation Manual
X-CM-QmB-eng
Part Number: 541B029AHG
June, 2008
1-1 How to Use This Manual
It is recommended to read this manual before installing, operating or
troubleshooting your QUANTIM
®
Mass Flow Meter/Controller.
This manual is organized into the following sections:
Section 1.
Introduction
Section 2.
Installation
Section 3.
Operation
Section 4.
Maintenance
Section 5.
Specifications and Approvals
Sections A-B
Appendices
Back Cover
Warranty, Local Sales/Service Contact Information
The Quality System at Brooks Instrument conforms to the quality
standards set forth in ISO 9001.
This instruction manual is intended to provide the user with all the
information necessary to install, operate and maintain the Brooks
QUANTIM Mass Flow Meters and Controllers.
1-2 Description
Brooks QUANTIM Mass Flow Meters are used to provide accurate
measurements of fluid flow, fluid density and temperature. The heart of
these systems is the Coriolis mass flow sensor, which produces an
electrical output signal directly proportional to mass flow rate and density.
Brooks QUANTIM Mass Flow Controllers couple the Coriolis sensor with
a control valve, digital signal processing (DSP) electronics and PID control
electronics to provide measurement and control in one compact package.
The QUANTIM device is available for a wide range of gas and liquid flows.
(See specifications, Section 5 for details).
