Brocade Communications Systems VDX 8770-4, Руководство по установке оборудования, Страница: 57 / 141

FIGURE 30 Adding the recessed rack ears
1. device
2. Recessed rack ears
3. Screw locations (opposite side similar)
2. Use a lift to raise the device to the correct level.
DANGER
Use safe lifting practices when moving the product.
3. If applicable, lock the wheels of the lift.
4. Carefully lift the device and slide it into the rack, as shown in the following figure.
5. Secure the device to the rack with six 10-32 screws and retainer or clip nuts. Tighten the screws according to the specifications
under Torque requirements on page 43.
Use the 10-32 x .63 in.(1.60 cm) Phillips screws with square cone washers to secure the device. Use either 10-32 retainer nut
for racks that have rails with square holes or 10-32 clip nut for racks that have rails with round holes to retain screws.
Mounting the Device
Brocade VDX 8770-4 Hardware Installation Guide
53-1002563-10 57