Brocade Communications Systems VDX 8770-4 Скачать руководство пользователя страница 38

Страница: 38 / 141

NOTE
For posts with round holes, use the clip nuts on the rack posts for securing 10-32 screws. For posts with square holes,
use the retainer nuts. Refer the following figure.

FIGURE 13 Using clip nuts and retainer nuts to secure screws to the rack uprights.

Clip nuts

Round hole rack rail

Retainer nut

Square hole rack rail

Install the device in the rack

DANGER

Use safe lifting practices when moving the product.

Move the lift with the device in front of the rack and adjust the height to match the installed rails.

2. If applicable, lock the wheels of the lift.

3. Gently slide the device onto the rack, ensuring that it remains supported during the transfer. See the following figure.

Mounting the Device

Brocade VDX 8770-4 Hardware Installation Guide

53-1002563-10

Содержание VDX 8770-4














































































































































Результаты поиска

Содержание VDX 8770-4

Отзывы:

Brocade Communications Systems VDX 8770-4, Руководство по установке оборудования, Страница: 38 / 141

Результаты поиска

Содержание VDX 8770-4

Отзывы: