Brocade Communications Systems VDX 8770-4, Руководство по установке оборудования, Страница: 119 / 141

SFP transceiver removal and replacement
Use the following procedure to remove and replace an SFP or SFP+ transceiver.
DANGER
All fiber-optic interfaces use Class 1 lasers.
DANGER
Laser Radiation. Do Not View Directly with Optical Instruments. Class 1M Laser Products.
Time and items required
The replacement procedure for one transceiver takes less than 5 minutes. You should have the following items available:
∙
Replacement SFP or SFP+ transceiver
∙
Optical transceiver extraction tool
Most Brocade devices and backbones come with an optical transceiver extraction tool ( Figure 63 ) and holster. The extraction tool is
designed to remove transceivers from modules where the space is limited.
FIGURE 63 Optical transceiver extraction tool
Removing a transceiver
For the following procedure refer to the illustration.
Complete the following steps to remove an SFP or SFP+ transceiver.
1. Remove any cables that are inserted into the transceiver. Use the extraction tool to open the cable latching mechanism.
2. Using the hooked end of the tool, pull the bail (wire handle) away from its pivot point and out, sliding the transceiver out of the
device or module.
Removal and Replacement Procedures
Brocade VDX 8770-4 Hardware Installation Guide
53-1002563-10 119