ENGLISH
OPERATION MANUAL
BRITEQ
®
4/19
BTX-HAWK
▲/▼Buttons:
mainly used to change the values of the selected function.
[ENTER]-button:
used to confirm the current action.
9. DISPLAY:
the backlit matrix LCD-display shows important information like: channel mode, DMX-start/end
address, ... The backlight is lit soon as one of the buttons is pressed. The display blinks while the DMX or
Art-Net signal is lost.
10. BATTERY OPERATION Button:
thanks to the internal battery you can browse the SETUP-menu and
change settings while the projector is disconnected from the mains.
11. MOUNTING BASE:
the strong metal base is designed to be used with 2pcs “OMEGA BRACKET BIG”
(included) and an optional safety cable.
OVERHEAD RIGGING
Important:
The installation must be carried out by qualified service personal only. Improper
installation can result in serious injuries and/or damage to property. Overhead rigging requires
extensive experience! Working load limits should be respected, certified installation materials should
be used, the installed device should be inspected regularly for safety.
Make sure the area below the installation place is free from unwanted
persons during rigging, de-rigging and servicing.
Locate the fixture in a well ventilated spot, far away from any flammable
materials and/or liquids. The fixture must be fixed
at least 50cm
from
surrounding walls.
The device should be installed out of reach of people and outside areas
where persons may walk by or be seated.
Before rigging make sure that the installation area can hold a minimum
point load of 10times the device’s weight.
Always use a certified safety cable that can hold 12times the weight of
the device when installing the unit. This secondary safety attachment
should be installed in a way that no part of the installation can drop more
than 20cm if the main attachment fails.
The device should be well fixed; a free-swinging mounting is dangerous
and may not be considered!
Don’t cover any ventilation openings as this may result in overheating.
The operator has to make sure that the safety-relating and machine-
technical installations are approved by an expert before using them for
the first time. The installations should be inspected every year by a
skilled person to be sure that safety is still optimal.
