Briteq BTX-HAWK, Руководство по эксплуатации

Страница: 12 / 24

ENGLISH OPERATION MANUAL
BRITEQ
®
10/19 BTX-HAWK
[Temp C/F]
Used to select if the LED-temperature is shown in degrees Celcius [°C] or Fahrenheit [°F].

Press the ▲/▼/◄/► buttons until the desired function is showing on the display.

Press the [ENTER] button: the values can be changed

Use ▲/▼ buttons to select one of these options:

[Celcius]: LED-temperature is shown in degrees Celcius [°C].

[Fahrenheit]: LED-temperature is shown in degrees Fahrenheit [°F].

Press the [ENTER] button to confirm.
[SET CONFIG > DEFAULTS]
–
This is your emergency exit if you really messed up the settings: just return to PRO or AUTO preset.
Also 2 user settings can be saved/loaded.

Press the ▲/▼/◄/► buttons until the desired function is showing on the display.

Press the [ENTER] button: the values can be changed

Use
◄/► buttons to select one of these options:

[PRO Use]: optimized standard settings for professional control of the unit.

[AUTO Use]: optimized standard settings for easy automatic control of the unit.

[USER Def.]: you can adapt the PRO or AUTO settings and save the new parameters as your
personal USER-settings.

Press the [ENTER] button:

[PRO Use] or [AUTO Use] was selected:
the display shows “LOAD”

Press the [ENTER] button and u
se ▲/▼ buttons to confirm YES / NO

Press the [ENTER] button to confirm.

[USER Def.] was selected:
the display shows “LOAD”

Use
◄/► buttons to select LOAD / SAVE

Press the [ENTER] button and u
se ▲/▼ buttons to confirm YES / NO

Press the [ENTER] button to confirm.

[SAVE] was selected: the current settings of the setup menu are saved to memory.

[LOAD] was selected: the previously saved settings are loaded.
PARAMETER name PRO defaults AUTO defaults USER defaults
[CHAN mode] 15 ch 5 MSL Current setting in the menu
[Install POS] Floor 180° Floor 180° Current setting in the menu
[NO DMX mode] Freeze Audio Current setting in the menu
[Slave Mode] Slave 1 Halogen Current setting in the menu
[DIM Curve] Square Square Current setting in the menu
[MIC Sense] 85% 85% Current setting in the menu
[PAN invert] OFF OFF Current setting in the menu
[TILT invert] OFF OFF Current setting in the menu
[PAN Range] 540 540 Current setting in the menu
[SPLIT Color] ON Current setting in the menu
[FEEDBACK] ON ON Current setting in the menu
[FUNC. Delay] 3 sec 3 sec Current setting in the menu
[STANDBY] 15 M OFF Current setting in the menu
[HEAD Fan] AUTO AUTO Current setting in the menu
[BASE Fan] AUTO AUTO Current setting in the menu
[Backlight] 5 min. ON Current setting in the menu
[AUTO LOCK] Menu OFF OFF Current setting in the menu
[no DMX blink] display ON OFF Current setting in the menu
[Temp C/F] Celcius Celcius Current setting in the menu
[SET CONFIG > TIMERS]
–
Shows the time the projector was used.

Press the
▲/▼/◄/► buttons until the desired function is showing on the display.

Press the [ENTER] button: the values can be changed

Use ◄/► buttons to select one of these options:

[Total Time]: The total time the unit was used since it was used for the 1
st
time, non resettable.

[Last JOB]: The time the unit was used on the last job. This timer can be reset in the (hidden)
calibration menu.