Briteq BTX-HAWK, Руководство по эксплуатации

Страница: 14 / 24

ENGLISH OPERATION MANUAL
BRITEQ
®
12/19 BTX-HAWK

Use
▲/▼ buttons to toggle between NO and YES.

Press the [ENTER] button to confirm.
[Calib. LED]

Due to tolerances in the production process, not all LEDs
have exactly the same brightness, therefore you can use
this option to match the Brightness of different machines.

Press the ◄/► buttons until the desired function is showing on
the display.

Press the [ENTER] button: the values can be changed

Use the ▼/▲ buttons to select a value between “50” (lowest
brightnes
s) and “100” (highest brightness).

Once the desired brightness is found, press the [ENTER] button
to confirm.
[Set PAN]
Used to adjust the home position of the PAN movement.

Press the ◄/► buttons until the desired function is showing on the display.

Press the [ENTER] button: the values can be changed

Use
▲/▼ buttons to adjust the home position of the PAN movement: -127 to +128

Press the [ENTER] button to confirm.
Set the other functions
Several other parameters of the machine can be adjusted: see the list.

Simply follow the exact same procedure as we explained above for the [Set PAN] function.
ELECTRICAL INSTALLATION
Important: The electrical installation should be carried out by qualified personal only,
according to the regulations for electrical and mechanical safety in your country.
STANDALONE WITH
BUILT
-
IN
CHASES:
Use this function when you want an instant show on only 1 projector.

Connect the projector to the mains and turn it on.

In the setup menu:

Load the [AUTO Use] defaults.

If needed: adapt the [ShowMode] and [MIC Sense] settings.
E
LECTRICAL INSTALLATION FOR TWO OR MORE UNITS IN MASTER
/
SLAVE
:
In this mode the units will show a synchronized show, working to the rhythm of the beat.

Connect 2 to maximum 16 units together using good quality balanced microphone cables. The first unit
in the chain will automatically act as the master, the other units will act automatically as slaves.

Make sure that all units are connected to the mains.

Done!
Remark:
if there’s no output, please make sure to set the option
[NO DMX Mode] of the projector to [Audio]
(audio mode) and sound sensitivity [MIC Sense] to a value over 70 (see previous chapter).