ENGLISH
OPERATION MANUAL
BRITEQ
®
8/19
BTX-HAWK
Press the [ENTER] button to confirm.
[PAN Invert]
Used to select if the PAN movements are inverted or not.
Press the ▲/▼/◄/► buttons until the desired function is showing on the display.
Press the [ENTER] button: the values can be changed
Use
▲/▼ buttons to toggle between [ON] and [OFF].
Press the [ENTER] button to confirm.
[PAN Range]
Used to select the maximum range for the PAN movements.
Press the ▲/▼/◄/► buttons until the desired function is showing on the display.
Press the [ENTER] button: the values can be changed
Use ▲/▼ buttons to select the desired PAN range:
540°
PAN range = 540° (or 1 ½ rotations)
630°
PAN range = 630° (or 1 ¾ rotations)
Press the [ENTER] button to confirm.
[SPLIT Color]
You can select if the unit can only show full colors or also split colors.
Press the ▲/▼/◄/► buttons until the desired function is showing on the display.
Press the [ENTER] button: the values can be changed
Use ▲/▼ buttons to toggle between [ON] and [OFF].
Press the [ENTER] button to confirm.
[FEEDBACK]
This function corrects the PAN/TILT positions automatically if someone bumps into the machine.
Press the ▲/▼/◄/► buttons until the desired function is showing on the display.
Press the [ENTER] button: the values can be changed
Use
▲/▼ buttons to toggle between ON and OFF.
Press the [ENTER] button to confirm.
[MIC Sense]
Used to set the sensitivity of the internal microphone
Press the ▲/▼/◄/► buttons until the desired function is showing on the display.
Press the [ENTER] button: the values can be changed
Use the
▼/▲ buttons to choose a value between “0%” (very low sensitivity) and “99%” (high sensitivity).
Press the [ENTER] button to confirm.
[STANDBY]
To save energy the projector goes in sleep mode after a certain time when no DMX is detected.
Press the ▲/▼/◄/► buttons until the desired function is showing on the display.
Press the [ENTER] button: the values can be changed
Use ▲/▼ buttons to select one of these options:
[OFF]
standby function not used
[0xxM]
The time (from 001 to 099 minutes) before the standby function is activated.
Press the [ENTER] button to confirm.
Remark:
when during standby mode a DMX-signal is detected, the projector first performs a reset.
[FUNC. Delay]
On the Function channel (last channel of the DMX chart) you can select some special functions, like
“blackout during PAN/TILT” and others. With this option you can select the delay before a selected
function becomes active.
IMPORTANT INFORMATION:
the function delay can only be set to zero seconds (no Delay) when you are
using a DMX-controller or DMX-software using presets for the DMX-values of the special functions.
Never use “no Delay” while using a simple DMX-controller with faders to set the functions manually!
Press the ▲/▼/◄/► buttons until the desired function is showing on the display.
Press the [ENTER] button: the values can be changed
Use ▲/▼ buttons to select one of these options:
