BRISTELL S-LSA, Руководство по техническому обслуживанию и инспекции

Страница: 65 / 201

6. CHAPTER - CONTROLS
Document: SLSA-MIP-5-4-0-US Date of Issue: 05/2016 Revision: -
6-9
6.3.4 Removal of wing flap control actuator
Type of maintenance: line
Authorization to perform:

Sport pilot or LSA mechanic
Tools needed:

wrench size 7/16 in, 1/2 in,

screwdriver
Removal of the flap control actuator is shown on Fig. 6-8.
Open the glove box cover on center console (1) between the seats.
Disconnect flap lever (3) from the flap actuator (4).
Disconnect flap actuator wire (5).
Disconnect the flap actuator (4) from the actuator hinge (6).
Remove flap actuator (4).
Fig. 6-8
Disassembly/Assembly of wing flap control actuator
1 ... Center console 2 ... Flap
3 ... Flap lever 4... Flap actuator
5 ... Actuator wire 6 ... Actuator hinge
6.3.5 Installation of wing flap control actuator
Type of maintenance: line
Authorization to perform:

Sport pilot or LSA mechanic
Tools needed:

wrench size 7/16 in, 1/2 in,

screwdriver
Installation of flap control lever is shown on Fig. 6-8.