BRISTELL S-LSA, Руководство по техническому обслуживанию и инспекции

Страница: 146 / 201

11.CHAPTER
– ELECTRICAL SYSTEM
Document: SLSA-MIP-5-4-0-US Date of Issue: 05/2016 Revision: -
11-10
11.5.2 Exchange of the optional position light lamp
Remove the cover of the position lights including the cover glass.
Slightly push in the front lamp and turn it counter
–clockwise (bayonet closure) and
exchange it for the same type.
Remove the rear lamp and exchange it for the same type.
CAUTION
Don’t touch the new lamps with bare hands. Use the cloth gloves or a cloth.
11.5.3 Exchange of the optional strobe light discharge tube
Remove the strobe/position light (see 11.3.3).
Exchange the discharge tube for the same type.
CAUTION
Do not touch the new discharging tube with bare hands. Use the cloth gloves or a cloth.
Install the strobe/position light (see 11.3.4)
11.5.4 Exchange of the optional landing light lamp
Unscrew the bolts from the attachment bracket.
Remove the bulb from the case.
Pull out the bulb. Disconnect wires on the rear side of the bulb.
Install the new bulb of the same type.
CAUTION
Do not touch the new bulb with bare hands. Use a cloth gloves or a cloth.
Connect wires of electrical system according to the scheme (see 16.CHAPTER
–
WIRING DIAGRAMS).
Put the bulb into the case.
Install assembled landing light on the bracket.
Screw back the bolts on attachment bracket.