Briggs & Stratton 5 HP, Руководство по устранению неполадок и ремонту

Страница: 64 / 76

62
NOTE
: Always torque the carrier with the gear
case attached to the midsection
(Figure 124)
.
18. Apply Anti-Seize to the propeller shaft threads.
Install the propeller, stainless steel washer and
stainless steel lock nut to the propeller shaft. Torque
the lock nut to
90 in. lbs. (10 Nm).
Mid Section Assembly
1. Apply Anti-Seize to the mounting surfaces of the
sleeves
(Figure 125)
. Place the sleeves and rubber
bushings together on the midsection
.
2. Insert brake shoe
(Figure 126)
to port side tilt
bracket
.
3. Locate reverse hook to port side tilt bracket with
pin .
4. Place the tilt bracket with the reverse hook onto the
midsection. Align the bushings already in position on
the mid section
(Figure 125)
with the grooves in the
tilt brackets
(Figure 126)
.
5. Place the remaining tilt bracket onto the midsection.
6. Secure the tilt brackets with four
(Figure 127)
screws . Torque screws to 55 in. lbs. (6 Nm) .
7. Install the transom brackets to the tilt brackets. Apply
Anti-Seize to the transom bracket bolt. Torque the
transom bracket nut
(Figure 127)
to
190 in. lbs (21 Nm).
1
2
5
9
8
7
6
2
1
Section 5 • Assembly
5 HP Outboard • Troubleshooting & Repair Manual
5
Figure 126 — Brake Shoe
Figure 125 — Sleeves & Bushings
Figure 124 — Torque Carrier
1
2
1
2
5
5
7
8
9
6