Briggs & Stratton 5 HP, Руководство по устранению неполадок и ремонту

Страница: 37 / 76

35
2. Lift out pawls
(Figure 61)
.
3. Rotate pulley until pulley feels free.
4. Carefully lift out pulley with spring
(Figure 62)
.
Inspect Spring, Starter Housing and Pulley
1. Inspect pulley for wear, cracks, rough edges
(Figure 63)
or burrs in pulley groove and wear
on center hole .
2. Replace pulley if damaged or worn.
3. Inspect spring for broken ends, kinks and burrs.
Replace assembly if any of the above conditions exist.
4. Inspect starter housing for wear or sharp edges at
rope eyelet
(Figure 64)
, center pivot post , and
inner spring anchor tab
.
5. Replace assembly if worn or damaged.
4
6 5
3
2 1
3
Section 3 • Disassembly
5 HP Outboard • Troubleshooting & Repair Manual
3
Figure 61 — Rewind Starter Pulley
Figure 62 — Pulley With Spring
Figure 64 — Starter Housing
1
2
3
Figure 63 — Starter Pulley Spring
2
3
6
1
4
5
CAUTION
: Pulley and spring is serviced
as an assembly. Do not remove spring from
pulley.