Briggs & Stratton 5 HP, Руководство по устранению неполадок и ремонту

Страница: 61 / 76

5
59
5. Pull rope until knot rests against pulley
.
6. Tie a temporary knot
(Figure 114)
in the rope to
prevent the rope from retracting into the pulley.
7. Let pulley and spring slowly retract rope against
temporary knot.
Install Blower Housing
1. Install blower housing
(Figure 115)
.
2. Torque screws to 85 in. lbs. (10 Nm) .
Gear Case Assembly
1. Install the shift cam/rod
(Figure 116)
to the gear
case
.
2. Install the shift shaft support with seal and the
O-rings to the input shaft carrier.
3. Install the input shaft carrier to the gear case.
Torque stainless steel screws and stud to
55 in. lbs. (6 Nm).
1 8
7
4
2 3
6
5
4
Section 5 • Assembly
5 HP Outboard • Troubleshooting & Repair Manual
Figure 114 — Securing Rope
Figure 116 — Gear Case
Figure 115 — Blower Housing
1
2
3
4
5
7
8
6
4
A B