Briggs & Stratton 1695904, Руководство оператора

Страница: 15 / 52

15
Operate the Snowthrower
WARNING
Operation
DO NOT discharge snow toward a building as hidden
objects could be thrown with sufficient force to cause
damage.
1. Start the engine. See Start the Engine in this section.
2. Adjust the direction and angle of the discharge chute
( A , Figure 8). See Discharge Chute and Deflector in
this section.
3. Fully press and hold the auger control ( B ) to engage
the auger rotation. Releasing the auger control lever will
disengage the auger.
4. Push the unit into the snow.
NOTE: When clearing wet, heavy, snow, reduced your
speed, maintain full throttle, and clear less than the full
width of the unit.
5. Tip the handle bars ( C ) forward slightly. This will cause
the snowthrower to pull itself forward.
Before operating, make sure the area
in front of the snowthrower is clear of
bystanders or obstacles.
Figure 8
C
B
A
en
Not
for
Reproduction