Briggs & Stratton 1695904, Руководство оператора

Страница: 12 / 52

Add Fuel
WARNING
When Adding Fuel
" <
2 minutes before removing the fuel cap.
" JV
" <@
the fuel, do not fill above the bottom of the fuel tank
neck.
" ))
lights, heat, and other ignition sources.
" )))[
cracks or leaks. Replace if necessary.
" X)%
engine.
1. Clean the fuel cap area of dirt and debris. Remove the
fuel cap ( A , Figure 4).
2. Fill the fuel tank with fuel. To allow for expansion of the
fuel, do not fill above the bottom of the fuel tank neck.
3. Reinstall the fuel cap.
12
Fuel and its vapors are extremely flammable
and explosive.
Fire or explosion can cause severe burns or
death.
Figure 4
A
Operation
Fuel Recommendations
Fuel must meet these requirements:
" ))
" !€€!X]‚>'^
High altitude use, see below.
" ƒ‚ †]^
‚‡†$<#\] % ^%
NOTICE: Do not use unapproved gasoline, such as E85.
Do not mix oil in gasoline or modify the engine to run on
alternate fuels. This will damage the engine components
and void the engine warranty.
To protect the fuel system from gum formation, mix a fuel
stabilizer into the fuel. All fuel is not the same. If starting
or performance problems occur, change fuel providers
or change brands. This engine is certified to operate on
gasoline. The emissions control system for this engine is
EM (Engine Modifications).
High Altitude
At altitudes over 5,000 feet (1524 meters), a minimum
‡‡!X]>'^%<
remain emissions compliant, high altitude adjustment is
required. Operation without this adjustment will cause
decreased performance, increased fuel consumption, and
increased emissions. See a Briggs & Stratton Authorized
Dealer for high altitude adjustment information.
Operation of the engine at altitudes below 2,500 feet
(762 meters) with the high altitude kit is not recommended.
Not
for
Reproduction