Page 31
Never try to touch the tools in the magazine while the machine is operating.
Keep away from the ATC related parts as well.
Clamp the workpiece and cutting tools securely.
Only use cutting tools that are with in the limit of individual models. A tool
exceeding the limit will interfere with the workpiece, fixture, or cover. Make
sure that all cutting tools are with in the limit before starting automatic
operation.
Before setting cutting tools in the ATC magazine, clean the spindle taper, tool
taper shank surface, and magazine pot tapered hole with a clean rag to remove
chips and foreign matter.
When fixing a cutting tool such as a face mill in the milling chuck, always use
the special fixing tool or vice to fix the tool holder in it, tighten the tool in the
tool holder securely.
Never tighten a cutting tool with the milling chuck attached to the spindle.
Never hold the tool holder in the vice, the tool holder taper will damaged if held
in a vice, use the correct tool setting devices.
A
Taper HSK
A63
B
Pullstud N/A
C
Dimension 32mm
D
Dimension N/A
E
Dimension(Min.) 26mm
GX 250 5AX
ATC 20
tools
Max Tool Diameter
80 mm
Max Tool Weight
6 kg
Max tool length
250 mm
