Page 19
SINCE 2000
1.For running smoothly, never accumulate too many
chips on conveyor ,which may easily cause conveyor
jammed or broke down.
2.Once conveyor is jammed or broke down,please let
conveyor reversed turn to expel chips first by push
"REV" button.after chips come out ,then push "FOR"
button to let conveyor run forward to work.
WARNING
Step blades and chain on conveyor
can injure hands easily.Please shut
off power of chip
maintenance
FANDE INDUSTRIES CO., LTD.
TAICHUNG 407, TAIWAN
PARK,
52-1,
ROAD 39, TAICHUNG INDUSTRIAL
TEL : 886-4-23507286 FAX : 886-4-23507287
Optional swarf conveyor
FAILUR E TO U SE PR OPER TOOL HOLD ER
THIS MACHINE IS C ON FIGURED TO USE
MAY RESUL T IN PERSONAL INJURY OR
THAT CONFOR M TO JMTBA STANDARD
MAY RESU LT IN PER SONAL INJUR Y
THIS MACH IN E IS CON FIGURE D TO
USE TH E FOL LOWIN G TOOL STUD ONLY
TYPE: JMTBA STAND ARD MAS 403 -19 82
#40 BT TA PE R TOOL H OL DERS
MACHINE D AMAGE
M AS 403 -1982
FAILUR E TO U SE PR OPER STUD
OR MA CHINE DAMAGE
P40 T SPEC IAL , METRIC THREADS
# 40 BT TAPER, 45 DE GREE
TOOL RELEASE
FAILURE TO USE PROPER TOOL HOLDER
THIS MACHINE IS CONFIGURED TO USE
MAY RESULT IN PERSONAL INJURY OR
THAT CONFORM TO JMTBA STANDARD
MAY RESULT IN PERSONAL INJURY
THIS MACHINE IS CONFIGURED TO
USE THE FOLLOWING TOOL STUD ONLY
TYPE: JMTBA STANDARD MAS 403-1982
#40 BT TAPER TOOL HOLDERS
MACHINE DAMAGE
MAS 403-1982
FAILURE TO USE PROPER STUD
OR MACHINE DAMAGE
P40T SPECIAL, METRIC THREADS
#40 BT TAPER, 45 DEGREE
NV 001030323A
TOOL RELEASE
+X
-X
-Y
+Z
-Z
+Y
+X
-X
-Y
+Z
-Z
+Y
NV 001030316A
NVA001030354A
Max Spindle Speed(RPM):
Max. Table Load(kg):
Max Tool Weight(kg):
Max Tool Diameter(mm):
Max Tool Length(mm):
Max Spindle S peed(RPM):
Max. Table Lo ad(kg):
Max To ol Weight(kg ):
Max To ol Diame ter(mm):
Max To ol Leng th(mm ):
NV 001030243A
NV 001030317A
NV 001030350A
SUPER GX 710 Front View
