33
Using the Vivo 40
Vivo 40 users manual
Doc. 003821 En-Uk E-1
5.5 Using the HA 20 Humidifier
The HA 20 humidifier is intended to humidify the patient air. The
HA 20 humidifier must be installed in order to access and navigate to the
humidifier setting on the Vivo 40 menu. The HA 20 humidifier can only be
activated if the Vivo 40 is operating.
If the HA 20 humidifier is disconnected and reconnected after usage according
to the instructions in the HA 20 Humidifier User manual, the Vivo 40 will
remember the humidity setting used.
Information about safety, warnings, product description, installation, usage,
cleaning, maintenance and technical specifications can be found in the Breas
HA 20 Humidifier User manual.
Read the chapter “Humidification” on page 15 carefully to make sure all
conditions are fulfilled and considered.
If the mains power source fails and the internal or the external battery
activates, the HA 20 humidifier will be turned off automatically. It must
be activated again manually, if humidification during battery use is nec-
essary.
Navigate to the “Humidity” page.
The humidity setting range from 1 to
9, where 9 generates the maximum
humidity.
Always set the humidity control to the
setting recommended by your doctor.
The HA 20 humidifier can be acti-
vated and deactivated by pressing the
humidifier soft key for more than
1 second.
