BRAYER BR1105, Инструкция по эксплуатации

Страница: 9 / 62

9 EN
for 25 seconds. The operation time of the pump 25
seconds is set by default.
Note : - watch the cup filling with the ready coffee, if
you need t switch the water supply off, press again the
button (18) « » or the button (20) « ».
• Switch the espresso machine off by pressing the on/
off button (17) «
», the buttons (17, 18, 19, 20)
illumination will go out.
• Wait until the coffee maker cools down and remove
the filter holder (5) by turning the handle (4) to the left
«INSERT». Remove the ground coffee remnants and
wash the filter (6).
• For easy removing of the coffee remnants use the
retainer on the handle (4) to prevent the filter (6) from
falling off the holder (5).
• Notes:
- the cups should be preliminary heated up, when
water heats up in the boiler, put the cups on the
tray (8).
- if you need to promptly remove the filter holder
(5), you have to reduce the pressure in the boiler,
switch the coffee maker off by pressing the on/
off button (17) «
», place a suitable cup under
the tip (12) and slightly open the steam supply by
turning the knob (9) « » counterclockwise.
After the pressure in the boiler is released, you
can re move the filter holder (5).
ESPRESSO PORTION SETTING
- To enter the programming mode, press and hold
the one cup button (18) « » for 3 seconds, the
button (18) « » illumination will be flashing.
Press the button (18) « » again. After the
required amount of ready coffee is poured into the
cup, press the button (18) « » again to finish
setting. Maximum time of water supply for making
one cup of coffee is 45 seconds.
- To enter the programming mode, press and hold
the two cups button (20) « » for 3 seconds,
the button (20) « » illumination will be
flashing. Press the button (20) « » again. After
the required amount of ready coffee is poured into
the cup, press the button (20) « » again to
finish setting. Maximum time of water supply for
making two cups of coffee is 90 seconds.
Notes:
- if you have programmed the water supply time
for making one cup of coffee, then the water
supply time for making two cups of coffee will be
automatically set doubled;
- water supply time for two cups of coffee can be set
up to 90 seconds. If the water supply time for two
cups of coffee was set, then the water supply time
for making one cup of coffee will be automatically
set as half the time for making two cups of coffee.
RETURN TO THE FACTORY SETTINGS
• Switch the espresso machine on and wait until the