BRAYER BR1105, Инструкция по эксплуатации

Страница: 6 / 62

6 EN
and apply to the service center.
• Transport the coffee maker in the original package.
• Keep the unit out of reach of children and disabled
• persons.
COFFEE MAKER IS INTENDED FOR HOUSEHOLD
USE ONLY, DO NOT USE THE COFFEE MAKER FOR
COMMERCIAL OR LABORATORY PURPOSES.
BEFORE USING THE COFFEE MAKER
After unit transportation or storage at low
temperature, it is necessary to keep it for at least
three hours at room temperature.
• Unpack the coffee maker and remove all the
packaging materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the coffee maker for damages, in case of
damage do not plug it into the mains.
• Make sure that the specifications of power supply
voltage specified on the lower panel of the unit
correspond to the specifications of your mains.
• Wipe the surface of the coffee maker body with a
clean, slightly damp cloth to remove dust.
• Make sure that the steam supply is closed. To do this
turn the knob (9) « » clockwise until bumping
«•».
• Before using the espresso machine for the first time,
wash all removable parts (1, 2, 5, 6, 12, 15, 16) with
warm water and neutral detergent, rinse and dry
them.
• Remove the water tank (15), fill it with cold water up
to the MAX mark and install it back to its place.
Notes:
- to fill the water tank (15) with water you can open
the lid (14) and pour water into the tank (15).
- to carry the water tank (15), take it by the handle
(13).
• Install the coffee filter (6) (do not add ground coffee
into the filter) into the holder (5) having preliminary
matched the ledge on the filter (6) with the groove on
the holder (5) and turn the filter (6) counter/clockwise
to fix the filter.
• Install the filter holder (5) into the coffee maker. The
holder (5) ledges should match the grooves on the
boiler «INSERT», after that turn the filter holder
handle (4) to the right until bumping «LOCK».
• Place a suitable cup on the grid (2).
• Insert the power plug into the mains socket.
Note: - the buttons on the control panel (7) are
sensory, you just need to touch the button to switch the
necessary operation mode on.
• Switch the espresso machine on by pressing the on/
off button (17) « », the button (17) illumination
will light up, and the illumination of buttons (18,