BRAYER BR1105, Инструкция по эксплуатации

Страница: 8 / 62

8 EN
holder (5).
• Open the lid (14) and fill the tank (15) with water, or
remove the tank (15) and fill it with water, then install
the tank (15) back to its place.
• Install the coffee filter (6) into the holder (5) having
preliminary matched the ledge on the filter (6) with
the groove on the holder (5) and turn the filter (6)
counter/clockwise to fix the filter.
• Install the filter holder (5) into the coffee maker. The
holder (5) ledges should match the grooves on the
boiler «INSERT », after that turn the filter holder
handle (4) to the right until bumping «LOCK».
• Place a suitable cup on the grid (2).
• Insert the power plug into the mains socket.
• Switch the espresso machine on by pressing the on/
off button (17) « », the button (17) illumination
will light up, and the illumination of buttons (18,
19, 20) will be flashing. When the buttons (18, 19,
20) illumination will glow constantly, it means that
preheating is finished.
• Switch the water supply on by pressing the button
(20) « », the pump will switch on for 25 seconds
and hot water will be poured into the cup. After
switching the pump off, pour the water out from the
cup.Preheating is over.
MAKING ESPRESSO
AFTER PREHEATING:
• Make sure that the steam supply is closed. To do this
turn the knob (9) « » clockwise until bumping
«•».
• Remove the filter holder (5) by turning the handle (4)
to the left «INSERT» and remove the filter holder (5).
• Put ground coffee in the filter (6), slightly tamp the
ground coffee with the back side of the measuring
spoon (16).
• Install the filter holder (5) into the coffee maker. The
holder (5) ledges should match the grooves on the
boiler «INSERT», after that turn the filter holder handle
(4) to the right until bumping «LOCK».
• Wait until the buttons (18, 19, 20) illumination glows
constantly, the espresso machine is ready for
operation.
• Switch the water supply on by pressing the button
(18) « » to make one cup of coffee. The pump
will switch on and will be operating for 15 seconds.
The operation time of the pump 15 seconds is set by
default.
• To make two cups of coffee press the button (20) «
». The pump will switch on and will be operating
ATTENTION!
When making coffee do not leave the operating
coffee maker unattended, as it is necessary to watch
the cup being filled with ready coffee!