BraunAbility EntervanII, Руководство по эксплуатации для владельца

Страница: 30 / 65

Page 28
Strap Angle Positioning:
The load angle should not be
less than 30
°
or more than 60
°
from vertical in a plane along
the fitting width as shown.
1
2
3
4
5
7 6
Track Center Line
Load
Angle
3" to 8"
Wheelchair and Occupant Restraint
continued Forward-Facing Wheelchair and Occupant Belt/Track System Instructions
1. Position and install the strap’s
track fitting three inches to eight
inches outside the front wheel
with the keeper away from
wheelchair.
2. To install the track fitting,
depress the keeper and insert
the fitting (keeper end first) into
the track as shown.
3. Drop back end of fitting into
track, and release keeper to lock
as shown. Pull on fitting to
ensure that it is locked in track.
To remove, simply reverse the
procedure.
4. Loop the other end of the strap
around the front of the wheel-
chair frame at a structurally
secure location and attach the
snap hook into the round ring as
shown. Be careful to keep the
strap away from sharp edges or
corners.
5. Pull the tensioning strap on the
cam buckle until tight. Repeat
the four steps for the other front
strap, making certain the
wheelchair is positioned perpen-
dicular to the floor track.
6. Velcro* is provided to attach
loose strap ends.
7. To release the tension on the
strap, press the buckle cam as
shown.
*Velcro is a registered trademark of
Velcro USA, Inc.
Front Cam Buckle Strap
Attachments
Read all warnings posted on
page on page 26!
Operation