Page 22
Door and Ramp Manual Operating Instructions
WARNING
• Clear ramp path
before performing
manual unfold
procedures. Ramp
will free-fall.
• Be certain door is
fully open.
• Keep clear of
moving parts.
Failure to follow
these rules may
result in serious
bodily injury and/or
property damage.
The power ramp cannot be
activated unless the MANUAL/
AUTO switch is in the AUTO
(down) position.
Note:
The MANUAL/AUTO
switch
must
be pressed to the
AUTO (down) position
before
performing electric procedures
.
FO
LD
U
N
F
O
L
D
A
C
D
Access Hole
Gear Rack
EN
G
A
G
E
R
E
L
E
A
S
E
TO UNFOLD RAMP:
1.
Clear the ramp path! Note:
The ramp path must be clear
.
The ramp will free-fall when pushed out. An assistant should
carefully
unfold and lower the ramp to the ground from outside
the vehicle if possible (Photo C).
2.
Push top of ramp out (if an assistant is not available
only
). See
Photo B.
TO FOLD RAMP:
Carefully
lift and fold the ramp fully (to stowed position). See
Photo C.
Note:
Remember to use good body mechanics. Assis-
tants should keep their back straight and bend knees when lifting.
Lift from the outboard end of the ramp.
Keep body parts and
obstructions clear of the area in which the ramp operates.
TO CLOSE DOOR
(To Re-engage Door Operator):
1.
Pull red manual door release handle UP
fully
. See Photo A.
2.
Carefully manually close door fully.
Note:
Be certain the power
door gear rack enters (aligns with) the access hole located in the
door opening front door post when closing the door (Photo D).
3.
Push red manual door release handle DOWN
fully
to secure
door. See Photo A.
Note:
It may be necessary for an assistant
to close the door tight from outside the vehicle while engaging
the release handle.
Push ramp out
if an assistant is not
available ONLY!
B
Note:
Engage vehicle transmission
in Park,engage vehicle parking
brake and press MANUAL/AUTO
switch to the MANUAL position
before performing manual ramp
operation procedures
.
Read page 21 before proceeding!
TO OPEN DOOR
(To Disengage Door Operator):
1.
Pull red manual door release
handle UP fully. See Photo A.
2.
Manually open door
fully
.
3.
Push red manual door release
handle DOWN
fully
to secure door.
See Photo A.
Note:
It may be
necessary to push the door to the
rear while simultaneously securing
the door with the handle.
Operation
Содержание EntervanII
Страница 45: ...Page 43 Notes Troubleshooting...
