Page 25
Wheelchair and Occupant Restraint
Wheelchair passengers
shown depict the
available wheelchair
seating positions.
Wheelchair capacity at
Mid-Point (Position
C
)
may have limitations
based on the physical
dimensions of specific
wheelchairs.
Horizontal
“A” Track
Horizontal
“A” Track
B
A
C
One Forward-Facing Wheelchair and Occupant Belt/
Track System is supplied with the Entervan II. This
system is provided for the restraint of one wheelchair
and occupant
only
.
Note:
The Entervan can accom-
modate more than one wheelchair passenger (as
shown above). Additional Forward-Facing Tie-Down
Belt Kits
must
be purchased for restraint of each
additional wheelchair passenger.
Note:
Wheelchair
passengers shown depict the available seating posi-
tions. Wheelchair capacity at Mid-Point (Position
C
)
may have limitations based on the physical dimensions
of specific wheelchairs.
The Forward-Facing Wheelchair and Occupant Belt/
Track System consists of:
1. “A” track mounted in the vehicle (three locations
shown above) to be used in conjunction with the
Forward-Facing Wheelchair and Occupant belts
supplied.
2. Forward-Facing Wheelchair and Occupant Belt Kit
#51140A — consisting of:
• Two adjustable over-center buckle belts for
securement of the rear of the wheelchair.
• Two adjustable cam buckle belts for securement of
the front of the wheelchair.
• One adjustable lap belt equipped with one “E” clip
which installs in the vehicle-mounted “A” track and
one female buckle receptacle. This lap belt is
used in conjunction with the vehicle factory-
equipped (OEM) upper torso shoulder harness.
Refer to the following guidelines, illustrations and the
Belt Attachment Instructions on pages 26 through 29
for proper use of the Forward-Facing Wheelchair and
Occupant Belt/Track System.
Forward-Facing Wheelchair and Occupant Belt/Track System
Note:
See page 3 for photos of horizontal “A” track
in the Front Lowered Floor Area (Position
B
) and
the Mid-Point Lowered Floor Area (Position
C
).
The Entervan II offers the following options for
placement and securement of wheelchair
passengers.
Quick-Release Driver Seat:
This seat
(Position
A
) can be removed and adaptive
driving systems custom tailored for the driving
wheelchair occupant can be purchased from
and installed by your local dealer. See pages
30 and 31 for seat removal and installation
instructions.
Quick-Release Front Passenger Seat with
Floor Track for Wheelchair and Occupant
Securement:
This seat (Position
B
) can be
removed and the seat location can be utililized
by a wheelchair occupant. The wheelchair
occupant
must
be secured using the Forward-
Facing Wheelchair and Occupant Belt/Track
System provided (detailed below).
Floor Track for Wheelchair and Occupant
Securement in Mid-Point Lowered Floor
Area:
The Mid-Point lowered floor area
(Position
C
) can be utililized by wheelchair
occupant(s). The wheelchair occupant
must
be secured using the Forward-Facing Wheel-
chair and Occupant Belt/Track System
provided (detailed below).
One Forward-Facing Wheelchair and
Occupant Belt/Track System
(detailed
below) is supplied with the Entervan II. This
system is provided for the restraint of one
wheelchair and occupant
only
.
Operation
Содержание EntervanII
Страница 45: ...Page 43 Notes Troubleshooting...
