BraunAbility EntervanII, Руководство по эксплуатации для владельца

Страница: 23 / 65

Page 21
Ramp Removal Instructions
Ramp Removal Instructions (continued) :
3. Remove the hairpin cotter from the top ramp pivot
axle. See Photo F on previous page.
Note: Keep the hairpin cotter when removing the
ramp. The hairpin cotter must be repositioned
when reinstalling the ramp assembly.
4. Pull release knob UP fully to unlatch ramp. See
Photo A on page 19.
5. Grip both sides of the ramp assembly and lift up.
Manually remove ramp. See Photo G on previ-
ous page. Use good body mechanics when
removing the ramp. Keep your back straight and
bend your knees when lifting the ramp.
Note: Keep the flat washer positioned on the
floor rotation axle when removing the ramp. The
washer
must be repositioned when reinstalling
the ramp assembly. See Photo G.
Reverse procedures to install ramp.
Note: Be certain the flat washer and hairpin
cotter are repositioned when reinstalling the ramp
assembly.
Door and Ramp Manual Operating Instructions
WARNING
• Clear ramp path
before performing
manual unfold
procedures. Ramp
will free-fall.
• Be certain door is
fully open.
• Keep clear of
moving parts.
Failure to follow
these rules may
result in serious
bodily injury and/or
property damage.
WARNING
Keep clear of
area in which
ramp operates.
52205
performing manual ramp operating
procedures. Keep your back
straight and bend your knees when
folding (lifting) the ramp.
Operate door and/or ramp
manually ONLY if either cannot
be operated electrically.
MANUAL/AUTO Switch
Release Handle
Notes: The vehicle
transmission must be
engaged in Park “P” and
the parking brake
must be
engaged before perform-
ing all manual operation
procedures
.
The MANUAL/AUTO
switch
must be in the
MANUAL position before
performing manual ramp
operation procedures
.
If you experience power or equip-
ment failure, refer to the step-by-step
instructions on the following page to
manually operate the slide door and
ramp. Manual operation instructions
also appear on Manual Operation
instructions decal #52212 (posted on
the power ramp motor housing).
Note: It is recommended to have an
assistant aid in performing manual
operating procedures. Many wheel-
chair passengers
will not be able to
perform manual operating proce-
dures. An assistant
may be re-
quired.
Use good body mechanics when
A red manual door release
handle is located rear of the
power ramp as shown. In the
event you experience power
or equipment failure, the slide
door can be opened manually.
Pull red manual door release
handle UP fully to release
(disengage) the door opera-
tor. Push the release handle
DOWN fully to re-engage the
door operator.
Operation