Bras Scirocco, Руководство оператора

Страница: 8 / 28

8
SCIROCCO
ENGLISH
1 TECHNICAL CHARACTERISTICS
The manufacturer reserves the right to make
changes without any prior notification.
2 INTRODUCTION
Read this instruction manual carefully to know the
specifications of the dispenser. As all mechanical
products, this unit requires cleaning and
m a i n t e n a n c e . I t s w o r k i n g o r d e r c a n b e
compromised by possible errors made by the
operator during disassembly and cleaning. For
this reason it is important that the staff in charge
of the dispenser is qualified to carry out the day to
day operations, which are dismantling, cleaning,
sterilisation and reassembly.
3 INSTALLATION
1
Remove the dispenser from the packaging.
(This should be kept for any future requirement)
2
Check the dispenser has not been damaged
during transport. The forwarding agent must be
notified immediately of any claim.
3
Install the dispenser on a counter top that will
support its weight, even with a full load.
4
Before connecting the dispenser electrically
check that the voltage (in the network) is as
shown on the data plate. Plug the unit into a
grounded, protected single phase electrical
supply according to the applicable electrical
codes and the specifications of your machine. If
the dispenser has no plug, conforming to the
regulations in your Country, to the cable,
supplied with an earthing pin or earthing contact
and suitable to currents of at least 10A 250V (for
areas with tension of 220V-230V 50-60Hz) and
20A 250V (for areas with tension of 100-115V
50-60Hz). If you want to make a fixed connection
to the network, connect the cord to a bipolar wall
breaker with a contact gap of at least 3mm. not
use e xte nsio n cord s to co nn ect th e un it
electrically.
5
The dispenser does not leave the factory
presanitized and sanitized. Prior to use it must be
disassembled, cleaned and sanitized according
to the instructions in chapter 5.3 CLEANING.
4 TO OPERATE SAFELY
1
Read the instruction booklet before using the
dispenser.
2
Use the dispenser only if it is grounded
correctly.
3
Do not use extension cords to connect the
dispenser electrically.
4
Do not operate the dispenser if it is not
closed and blocked with screws.
5
Do not place fingers or objects in the cooling
fissures and faucet outlet panels louvers.
6
Do not open the dispenser for cleaning or
maintenance without ensuring it has been
disconnected from the electricity.
7
Do not remove the container when the unit is
Scirocco
Transparent removable bowls n 1
Capacity of each bowl, approx. l 5
Dimensions:
width cm 24
depth cm 32
height cm 49
Net weight, approx. kg 7
Gross weight, approx. kg 8
Adjustable thermostats n 2
Noise level lower than 70 dB (A)
IMPORTANT
Electric specifications: read the informa-
tion on the data plate of each single dispen-
ser, situated on the underside. The serial
number of the units is preceded by #
ATTENTION
Ensure that the unit is grounded correctly;
if not it may cause electric shock to per-
sons or damage the dispenser.