R4
SEELEY INTERNATIONAL –
HOME OWNER’S MANUAL
AUTO MODE OPERATION
• When operating in AUTO mode the
cooler will automatically turn on and
off to maintain the programmed
temperature.
• The SCC will automatically advance
through the 4 time periods (WAKE,
AWAY, HOME and SLEEP) each day
and adjust the set temperature to the
pre-programmed temperature you
have set for each time period (see
page 6).
Turning the Cooler ON and
Selecting AUTO Mode
1
Press the ON/OFF button to turn the
SCC on.
2
Press and hold the SET button and
press the MAN/AUTO button to set
the SCC to AUTO mode (the
MAN/AUTO button must be pressed
within less than 3 seconds of
pressing the SET button).
• If the set temperature is less than
the room temperature for the
current time period the cooler will
start.
• The SCC will display the time
period and run according to the
temperature set for that time
period.
• The SCC will automatically
advance to the next time period
and operate according to the set
temperature for the new time
period.
• The SCC has a built-in 2 minute
delay to prevent the compressor
from re-starting within less than 2
minutes of last turning off - this is
to prevent damage to the
compressor.
Turning the Cooler OFF
1
Press the ON/OFF button.
• The display will revert to OFF
mode.
• The room fan and compressor will
turn off immediately.
Adjusting the Room Temperature
• The set temperature can be
temporarily adjusted while
operating in AUTO mode.
1
Decrease set temperature: Press the
DOWN arrow to decrease set
temperature by 1ºC.
2
Increase set temperature: Press the
UP arrow to increase set
temperature by 1ºC.
3
At the start of the next programmed
time period, the set temperature will
revert to the pre-programmed
temperature you have set for that
time period.
Using HOME/AWAY in AUTO
Mode
1
Press the HOME/AWAY button to
advance to the next time period.
Normal program settings will resume
at the end of the next period.
Following is an example of how this
can be used:
• If the SLEEP period is
programmed to start at 10pm and
you go to bed early at 9pm,
pressing HOME/AWAY will “bring
forward the SLEEP period settings.
REFRIGERATED COOLING
