6
Spectrolink Comfort Control
AUTOMATIC WATER DRAIN
If an automatic drain valve system has
been installed with your cooler, the
cooler will automatically drain the
water. This helps ensure the water
remains fresh and helps maintain your
cooler in good condition to ensure
optimum cooling performance.
The drain is activated by the following
conditions:
• High water salinity (standard on
Braemar and Breezair models only),
• Pre-set auto-drain time period has
expired (standard Coolair models),
• If the cooler is turned off for a
continuous 72 hours (3 days), or
• A manual drain can be initiated at
any time by pressing the UP and “
DOWN arrow buttons
simultaneously with the SCC off and
door closed The display will show
"dr" to confirm the operation has
activated.
During the drain operation all buttons
are in-operative. When the cooler is
re-started, there will be a delay while
the cooler tank is re-filled with fresh
water.
WATER BLEED SYSTEM
During cooler operation the bleed
system drains a small amount of water
from the cooler to ensure that fresh
water is continually added. This is set
by your installer and depends on local
conditions. This continuos bleed
system is used where a drain valve is
not installed.
EVAPORATIVE COOLING
