Installation
WF2613
Bradley
•
215-1451 Rev. F; ECN 13-00-001
3/5/2013 7
WARNING! Use suitable lifting equipment to
position the bowl and pedestal
assembly. Handle wtih care!
Failure to do so could result in
serious personal injuries.
CAUTION! Bowl surface is very smooth.
Approximate weight of bowl is
73 pounds. Handle with Care!
3
Anchoring Pedestal
A
Position the pedestal assembly. Anchor
the pedestal assembly to the floor with
suitable anchors (supplied by installer).
B
Place the bowl on the pedestal using
suitable lifting equipment.
4
Installing Drain Spud in Bowl
A
Loosely attach the drain spud to the bowl
with the locknut and washer.
Seal between drain spud and drain hole with
plumber’s putty (supplied by installer).
For proper drainage, the bowl and the
pedestal must be level when they are
secured to the floor
Strainer
(S45-067)
Holes for Anchor
Bolts (Supplied
by Installer)
Spud
(112-015)
Washer
(142-068)
Drain Pre-Pack
(S45-273)
Bowl
Locknut
(161-021)
B
Tighten the spud and lock nut against bowl.
B Trap Option: Attach B trap to drain spud.
Tie Pipe Option: Attach tie pipe bracket to
drain spud.
C
Secure the strainer to drain spud with screws
provided.
D
Connect spud (or B Trap or Tie Pipe Bracket)
to drain.
