Installation Instructions
Operator’
s Manual
SMASH 24GT
62
C.
WARNING: Before inserting the column fixing pin "
4
",
grease and position the shaped washers "
2
", as
illustrated. Insert the column in its seat, then fit the pin
"
4
", the two tapered bushings "
5
", the washers "
6
" and
the nuts "
7
". Tighten the nuts evenly on both sides and
manually finish tightening until the tapered bushings
are locked in the seats.
IMPORTANT!
THEN TIGHTEN THE NUTS "
7
" WITH A TIGHTENING
TORQUE OF 90 N/m.
D.
Tilt the column backwards. Pull the rod "
8
" of the tilting
cylinder and connect it to the column with the pin "
9
".
Lock pin wit
h the split pin "
10
".
E.
Remove the left side of the machine and attach air hose
"
3
" (tool movement) to the pedal assembly connector
"
11
".
For models with the inflating device built into the column
also:
F.
Connect the diameter 8 hose (
12, Fig. iii-4
), from the
column to the inflating pedal tap as illustrated.
Note
: For hose connections, see the pneumatic
diagrams supplied in the Spare Parts Manual.
G.
Refit the column base guard "
1
" and all of the parts
previously removed.
H.
Secure the tyre changer to the floor as described in
the chapter on Installation (
i ).
iii-4
http://www.atlas-tools.ru
АТЛАС
-
ОБОРУДОВАНИЕ
для
АВТОСЕРВИСА
+7 (863) 226-92-88
