Layout
Operator’
s Manual
SMASH 24GT
24
c
a
b
D
A
C
B
D.
Open the bead breaker arm. Press down and hold, WITH
LEFT FOOT, the
second
pedal from the right: by doing
this you operate the bead breaker blade and the arm
will move towards the machine. Release the pedal: the
F
bead breaker blade will retract.
E
4.1-1
DANGER OF LEG TRAPPING
E.
The push button on the handle allows to release the
arms and drive the mount/demount tool in the correct
position.
1.
To unlock and let the slide with the tool go up: push the
button firmly with the forefinger, in the direction of the
arrow (
A, Fig. 4.1-2
).
2.
To unlock and let the slide with the tool go down: push
the button with the thumb in the direction of the arrow,
until the resistance increases (
B, Fig. 4.1-2
).
3.
To lock: push the button firmly with the thumb (
C, Fig.
4.1-2
).
DANGER OF HAND CRUSHING
WARNING: THE OPERATIONS COULD BE
DANGEROUS. FOLLOW THE SAFETY INDICATIONS
SET OUT IN THE PLATES
WARNING: DANGER OF HANDS BEING CRUSHED
4.1-2
4.1-3
4
3
F.
Press bead seater/inflator pedal on left side of the
machine down (
1, Fig. 4.1-3
): air will come from inflation
hose end (
2, Fig. 4.1-3
).
2
Only for Tubeless wheel models:
F1.
Press bead seater/inflator pedal (
1, Fig. 4.1-3
) on
left side of the machine half way down: air will come
from inflation hose end only (
2, Fig. 4.1-3
).
F2.
Press the key on the Tubeless Beading Nozzle
(
3, Fig.4.1-3
), then press the pedal all the way down
decisively (
1, Fig.4.1-3
); a high pressure air jet exits
the Tubeless Beading device.
WARNING
: HOLD THE TUBELESS BEADING
NOZZLE FIRMLY.
4.1-4
Note:
Air simultaneously continues to exit the hose
connected to the tire.
WARNING
:
http://www.atlas-tools.ru
АТЛАС
-
ОБОРУДОВАНИЕ
для
АВТОСЕРВИСА
+7 (863) 226-92-88
