Page 15/30
August 2022
Bale wrapper | User manual
4.3
Installation of the machine at your work site
IMPORTANT
The machine should rest on the floor and be stabilized during operation. If it is not stable or well supported it may
result in damage to the machine.
Place the machine in such a way that the prevailing wind/breeze will blow the fumes/smoke away from the user
area and into an area clear of people.
4.3.1
Assembly
Regarding the bolts and nuts required for the assembly of the respective parts, refer to the symbols indicated in the
packing list. When assembling, adjust the tightness of the bolt and nylon flange nut to ensure that the handle can
move vertically with ease.
Stretching device assembly
Mount the stretching device from above on the front side of the main frame of the machine and insert a bushing
into the hole at the tip of the plate from above.
Mounting the handle
Mount the handle on the front side of the main frame of the machine.
Mounting of stretching attachment
Mount the stretching attachment from above on the front side of the main frame of the machine and insert a
bushing into the hole at the tip of the plate from above.
1
Small bolt M8x25
3
Main frame
2
Handlebar
4
Nylon nut with M8 flange
