Page 19/30
August 2022
Bale wrapper | User manual
Adjusting the side roller
Place the bale to be wrapped along the side platform on the turntable.
Adjust the side roller to fit the width of the bale, and secure using the bolt with its nut.
CAUTION
When adjusting the side roller, maintain a clearance of 20 to 50 mm between the end of the bale and the side roller.
After completing the adjustments, tighten the bolt and nut firmly.
DO NOT load bales heavier than 30 kg on this machine. DO NOT drop the bale from height, deposit it on the
turntable. Otherwise damage to the machine may occur.
WARNING
Touching or tampering with the turntable during operation may cause serious personal injury. DO NOT allow people
in the working area. If a bale that is irregularly shaped or too light is to be wrapped, it may be ejected, injuring people
in the vicinity. DO NOT wrap these bales.
IMPORTANT
DO NOT open any cover during handling or rotating operations. If you touch the foil or tensioning roller while the
foil is being stretched, it may be damaged, trapping you and causing serious damage. DO NOT touch the foil or
tensioner during operation. Adjusting the machine or removing any material without stopping the motor can cause
serious damage. Stop the motor and check that all parts are stabilized and stopped before doing any other
operations.
1
Bale
2
Side roller
