Page 9/30
August 2022
Bale wrapper | User manual
2.6
Maintenance safety
1.
Good maintenance is your responsibility. Poor maintenance is an invitation to trouble.
2.
Follow good shop practices.
3.
Keep service area clean and dry.
4.
Be sure electrical outlets and tools are properly grounded.
5.
Use adequate light for the job at hand.
6.
Make sure there is plenty of ventilation. Never operate the engine of the towing vehicle in a closed building.
The exhaust fumes may cause asphyxiation.
7.
Before working on this machine, shut off the engine, set the brakes, and remove the ignition key.
8.
Never work under equipment unless it is blocked securely.
9.
Use personal protection devices such as eye, hand and hearing protectors, when performing any service or
maintenance work. Use heavy gloves when handling blades.
10. When replacement parts are necessary for periodic maintenance and servicing, genuine factory replacement
parts must be used to restore your equipment to original specifications. The manufacture will not be
responsible for injuries or damages caused by use of unapproved parts and/or accessories.
11. A fire extinguisher and first aid kit should be kept readily accessible while performing maintenance on this
equipment.
12. Periodically tighten all bolts, nuts and screws and check that all pins are properly installed to ensure unit is in
a safe condition.
13. When completing a maintenance or service function, make sure all safety shields and devices are installed
before placing machine in service.