Page 23/30
August 2022
Bale wrapper | User manual
3.
The platform rotation speed is 40rpm when the motor control is set to maximum power (hare symbol). Set the
motor control to a position from maximum speed (rabbit symbol) to minimum speed (turtle symbol) to suit the
shape and weight of the bale.
CAUTION
If an irregularly shaped or lightweight bale is to be wrapped, it may be thrown out and cause injury to nearby
persons. Reduce the speed of the bale wrapper.
Follow the following steps:
1. Place the bale on the turning platform.
2. Pull the foil and attach it to the side of the bale.
3. Pull the starter lever to start wrapping.
4. Wrap the entire bale.
5. The platform will automatically stop rotating.
6. Cut the foil and fasten the end on one side of the bale.
7. Remove and store the bale.
CAUTION
In case the bale wrapping is found to be insufficient, pull the tear‐off lever slightly (to such an extent that the sliding
arm does not fall off) and wind the foil 2 or three turns in a medium clutch position.
After completing the operation
Take care of the machine to prolong its working life to the maximum.
CAUTION
Check the machine after each operation for any loose parts. Stop the machine for any operation.
Care after each day's operation
1.
Completely remove all grass adhering to the machine.
2.
Check for any screws, washers, or nuts that may have come loose or loosened. Also, confirm if any components
are broken. If any damage is found it should be repaired before using the machine again.
CAUTION
When cleaning the machine, be careful not to get the motor wet.
