24
Startup
To turn on the LATITUDE Programming System:
1.
Connect the power adapter cord to the DC receptacle on the left side panel
of the LATITUDE Programming System (Figure 3 Left Side Panel of the
Programmer on page 17).
2.
Plug the AC power cord into the power adapter and an appropriate AC
outlet.
3.
Press the power button
.
NOTE:
It can take up to one minute for the Model 3300 Programmer to
complete its self tests and display the startup screen. During this time, the
screen may be flashing or blank.
4.
Wait for the startup screen to appear.
NOTE:
During system startup, observe the screen for any messages. If
an error message appears, do not use the device, write a detailed
description of the error, and contact Boston Scientific using the information
on the back cover of this manual.
5.
When startup is complete, the main screen displays (Figure 9 Main Screen
on page 25), and the system is ready for use.
The Programmer’s touchscreen allows you to select items such as buttons,
check-boxes, and tabs that are displayed on the screen. Only one item can be
selected at a time.
NOTE:
The screen images in this manual are representative and may not
exactly match your screens.
CAUTION:
If you want to use a stylus, ensure that it is a projected
capacitance stylus. The use of any other object could damage the touchscreen.
