30
Bost
on Scientific (Mast
er Br
and,
Spir
al Bound Manual T
empla
te
, 8
.5in x 11in Global,
923100
58G),
IFU
, MB,
CU4,
en,
5
1011236
-001A
Black (K) ∆E ≤5.0
Black (K) ∆E ≤5.0
Figure 18. Connect Interface Cable Screen
Note:
If the Connector Interface Cable is already connected when the Control Unit is turned ON, the channel is automatically activated and a
connect device cables message is displayed (see Figure 20)� Similarly, if the Connector Interface Cable is connected after the Control Unit is
turned ON, the channel is automatically activated and a connect device cables message is displayed (see Figure 20)�
2� Connect the Connector Interface Cable to the channel A or B receptacles on the front panel of the Control Unit by inserting the
Connector Interface Cable until a click is heard�
Note:
The Connector Interface Cable can be used in either channel A or B� If providing ultrasound therapy to two devices, connect one
Connector Interface Cable to each receptacle (see Figure 19)�
Start
Stop
A
B
Start
Stop
A or B illuminates on the Connector Interface
Cable housing once connected to the Control
Unit. A or B indicates the channel to which the
cable is connected.
A
B
Figure 19. Connect Interface Cable Diagram
CMYK/
