62
6.3.10 Network Status Properties
The
Network
properties sheet lets you set up a method for SNMP upgrades. Invoke this properties sheet by
clicking on the
Network
tab in the
Terminal Properties
dialog box. The following figure shows the
Network
properties sheet. If you have a DHCP server, then click on Obtain an IP address from a DHCP server to
automatically get an IP address. Or you may specify an IP address by yourself. You can also type a
Name
for
the
Terminal
. Refer to page 11 Network Configure. The Terminal Group box is for the centralized remote
management software to control WBTs by group name when doing grouping.
6.3.11 Security Properties
Use the
Security
properties sheet to access security features if you want. Click to enable terminal security, and deactivate
the
Terminal Connection Manager
function and the
Hide Terminal Connection Configure Tab
function. By default the
Terminal Connection Manager function is enabled but the Hide Terminal Connection Configure Tab function is disabled.
Enable “
Enable Property Password
” then type the new password that you wish to change on the “
New Password
“ column,
and then re-type it again on the “
Confirm Password
“ column. Both password column must be identical.
Click OK then the WBT will ask for rebooting to save the setting change. After rebooting, before entering the Connection
Manager dialog box, this WBT will ask for user name and password that you just typed in. Then go back to this General tab
of Terminal Properties dialog, now the “Enable Property Password ” option shall show up. Tick it up, then whenever the
energy saver is activated and you want to deactivate it to enter the system, this password protection function will show up.
Enable “
Enable RDC
”, the WBT could be in the control of RM tool.
Enable “
Enable VNC
”, the WBT could be in the control of VNC viewer, and the default password is “
password
”.
BOSSTX2B CE 5.0 User's Manual
