43
The Make New Virtual Private Network Connection dialog should now appear. Type in the Host name or IP address you wish
to connect to. Then click on “TCP /IP Setting” .The TCP/IP Setting is the same as stated in the Make New Dial-Up
Connection above. After all done, click on “Finish” to go back to the Configure entry of Terminal Connection Manager.
4.6.3.2 To start Virtual Private Network Connection
In Connections entry of Terminal Connection Manager select the RAS connection you would like to connect to. The target
and host should now be connected. You should see connection icons in the status bars of your host and target. Once the
Virtual Private Network Connection is connected successfully, then press the Hot-keys “
Ctrl +Alt + End
“ to back to the
“Terminal Connection Manager ”and double click on RDP or ICA for connection.
4.7 Microsoft Internet Explorer Connection
This is an optional function for your WBT; check your vender for this support before your purchase. This local browser
connection will require more RAM utilization and powerful CPU to have better performance. This WBT is equipped with a
CPU of outstanding speed to offer you a local browser session you never experience before.
4.7.1
To Make a New Microsoft Internet Explorer Connection
To make a new connection follow the below steps: In
Connection Manager
dialog box click on Configure tab, click on
Add
to add a new connection, scroll through the list in the box, choose
Microsoft Internet Explorer
. Then click on
OK
to
continue.
BOSSTX2B CE 5.0 User's Manual
