42
The Make New Direct Connection dialog should now appear. Select the serial connection for the current COM port being
used for the connection. Then click on “Configure” and click on “TCP /IP Setting” .The setting of “Configure” and “TCP/IP
Setting” are the same as stated in the Make New Dial-Up Connection above.
Click on “Finish” once the “Configure” , “TCP /IP Settings” and “Security Settings” have been completed. Then you will go
back to the Configure entry of Terminal Connection Manager.
4.6.2.2 To Start Direct Connection
In Connection Manager dialog box click Connections tag and select the RAS connection you would like to connect to. The
figure shows as below.
The target and host should now be connected. You should see connection icons in the status bars of your host and target.
Once the Direct Connection is connected successfully, then press the Hot-keys “Ctrl +Alt + End “ to back to the “Terminal
Connection Manager ”and double click on RDP or ICA for connection.
4.6.3 Virtual Private Network Connection
4.6.3.1 Make a New Virtual Private Network Connection
In the Make New Connection dialog select “Virtual Private Network” radio button. Then click on “Next”.
BOSSTX2B CE 5.0 User's Manual
