Bosch VideoJet 8004 Скачать руководство пользователя страница 33

Страница: 33 / 164

VideoJet 8008 / VideoJet 8004

| Installation and Operating Manual

| 33

Bosch Security Systems | 2006-07 | V1.5

Configuration using a Web browser

Unit overview

The unit overview is a graphic presentation of the various areas of the configura-
tion. The individual configuration parameters are arranged in groups and dis-
played in separate windows. You can access the individual areas directly.

– Click one of the graphic symbols. A new window will open.

– Click in the text fields to enter values or use the other controls that are avail-

able, such as buttons, checkboxes or list fields.

– Click the

SETTINGS

link at the top of the window to close the window without

saving the changes made.

Making changes

After making changes in a window, click the

Set

button to send the new settings

to the unit and to save them there.

Caution

Save the changes made in each window by clicking

Set

. If you click the

Set

button, only the settings in the current window are saved.

The following sections describe the individual windows that can be accessed
using the graphic symbols in the unit overview.

Содержание VideoJet 8004





































































































































































Результаты поиска

Содержание VideoJet 8004

Отзывы:

Bosch VideoJet 8004, Инструкция по установке и эксплуатации, Страница: 33 / 164

Результаты поиска

Содержание VideoJet 8004

Отзывы: