Bosch VideoJet 8004 Скачать руководство пользователя страница 130

Страница: 130 / 164

Installation and Operating Manual |

VideoJet 8008 / VideoJet 8004

| 130

Operation

Bosch Security Systems | 2006-07 | V1.5

Backup

You can back up the videosequences or single images stored on the hard drive
of the unit to the computer's hard drive.

First select the required sequence as described in the previous section. The fol-
lowing buttons are available for the backup:

Back up a sequence to the computer's hard drive

Back up a single image to the computer's hard drive

– Start playback of the sequence that you want to save either completely or par-

tially on the computer's hard drive.

– Click the icon for the sequence backup. The backup starts immediately – this

process is displayed by a flashing red dot in the icon.

– Click the sequence backup icon again to end the backup.

This procedure can be repeated many times within the sequence to back up
multiple extracts from a longer sequence.

– Click the button for backing up a single image to back up only snapshots from

the running sequence to your computer's hard drive.

The single images are displayed in the

Event log

area immediately after they

are clicked.

The storage location for the sequences and single images can be specified in
the configuration of the unit (see page 114).

Содержание VideoJet 8004





































































































































































Результаты поиска

Содержание VideoJet 8004

Отзывы:

Bosch VideoJet 8004, Инструкция по установке и эксплуатации, Страница: 130 / 164

Результаты поиска

Содержание VideoJet 8004

Отзывы: