Bosch Rexroth PSI 6100 L1 Series, Руководство по эксплуатации

Страница: 431 / 460

1070080028 / 08 Bosch Rexroth AG PSI 6xxx | 431 /460
Technical data
Table 26: Electrical data across power units
Mains connection
PSI61xx/PSI63xx Lx/Wx: TN,TT,IT
PSI61xx/PSI63xx L1/W1 Pha/GND: max 480VAC
PSI61xx/PSI63xx L2/W2 Pha/GND: max 600VAC (to
be verified)
PSI62xx/PSI64xx/PSI65xx: TN, TT
PSI62xx/PSI64xx/PSI65xx Pha/GND: 300VAC
Mains frequency 50 or 60 Hz
Overvoltage protection Metal oxide varistor (MOV)
Power supply
Power system Dependent on the integrated power unit.
Logic (X4) Typ. 24 V
DC
; 19 … 30 V
DC
to EN 61131-2
I/O array According to I/O module used.
Refer to page 292 et seq.
Options for generation of supply voltage for the logic Via external 24 V
DC
power supply unit or
via own supply through the integrated power supply
unit (is fed internally by mains).
Power input
Power system Dependent on the integrated power unit.
Nominal current logic approx. 1.5 A
(at 24 V
DC
; without fan hood, without I/O module and
without additional consumers at X5)
Making current logic approx. 2 A for 10 ms
(at 24 V
DC
; without fan hood, without I/O module and
without additional consumers at X5)
Nominal current fan hood approx. 2 A (at 24 V
DC
)
I/O array According to I/O module used.
Refer to page 292 et seq.
Properties of primary voltage (to the MF transformer) 1 kHz; pulse-width modulated
Integrated power sup­
ply unit
(Output: X4 between
terminals 5 and 8) Output voltage 24 V
DC
Output current max. 2 A
"
Please note:
When the PSI mains supply is switched on, the spe­
cified output current is only available from mains vol­
tage on, and then only until the PSI mains supply
drops to its lower tolerance limit.
English