Bosch ICP-EZM2, Справочное руководство системы

Страница: 11 / 126

Easy Series Overview | en 11
Bosch Security Systems, Inc. System Reference Guide F01U087835 | 02 | 2008.10
1.3.2 User Phone Menu
Exit system test menu
Two-Way
Voice Session
Talk to person at control center
Listen to person at control center
End voice session
1
2
#
Exit
1
2
#
Event history
System test menu
1 Set date and time
Full system test
Reset system
2
3
Warning device test
Battery test
Communication test
Control center test
Point test
1
2
3
4
5
#
4
5
Exit #
Most recent events
Events by date
Last alarm event
Last 10 events
Exit
1
2
3
4
#
System
Maintenance
2
3
Phone
Menu
Enter user
passcode
1
To hear this option, custom protection must be
enabled.
Only use this option
on non-UL systems.
Turn System On or Off
5
To turn an output on or off, press the
corresponding number key on the phone.
Operate Outputs
Turn system on and leave
Turn system on and stay inside
Turn on custom protection
1
2
3
# Exit
End phone session.
}
The voice session only lasts 90 seconds.
To reset the timer, press [1] on the phone during talk mode,
or [2] during listen mode.
User Menu
3
Add new user
Change user
Delete user
1
2
3
4
#
Exit
To add or change a user:
}
Operate outputs
OR
Expert Programming (Enable Installer Access)
4
6
Only the Master User can
access the full User Menu.
Users 2 to 21 can only change
their own passcode.
Change token
Record description
Change passcode
Change key fob
Exit
1
2
3
4
#
1
Only a user passcode (Users 1 to 21) can access the User Menu.
2
If the system is on, the System Maintenance option is not available.
3
Only the master user can add, change, or delete users. Users 2 to 21 can only change their own passcodes. User voice descriptions are
stored in the voice module and are not transferred to the control panel with programming data.
4
Option 6 allows the master user (User 1) to enable the Installer Passcode. Refer to Expert Programming Item Number 142 in
Section 5.2.2 System Programming Items , Page 43.
Availability of the menu items shown above depends on the system's status.
When recording any description (point, output, user, or custom message), do not press any buttons on your phone until prompted
by the system.