Bosch ICP-EZM2, Справочное руководство системы

Страница: 31 / 126

Easy Series Point Expansion | en 31
Bosch Security Systems, Inc. System Reference Guide F01U087835 | 02 | 2008.10
3.3 Wireless Maintenance
3.3.1 Wireless Configuration Menu
Use the Wireless Configuration Menu to:
– Add new wireless devices to an existing wireless system
– Add wireless devices that were not discovered when the wireless network was first
discovered
– Replace or delete wireless devices from an existing wireless system
To access the Wireless Configuration menu from the Installer Menu of a phone session (refer
to Section 2.7.2 Initiate a Phone Session from the Control Panel , Page 22), press [1] [6] for
Wireless Configuration.
Menu options are only available after the initial device discovery and point test is completed.
Button
Press
Menu Option Description
[1] Replace a Device Use this option to replace a known device with a new device.
– Press [1] to replace a point, or [3] to replace an output.
For a relay module, select either the input or output, and then enter the
appropriate number in Step 2.
– Enter the desired point number or output number.
The device discovery process starts.
– When the system announces "Test all points," activate the new device.
The new device replaces the current device. If other devices were
discovered in Step 2, they are returned to the undiscovered state.
[2] Add a Device Use this option to add more devices to the wireless network.
When you press [2] to select this option, the device discovery process starts.
When the system announces "Test all points," activate all of the new devices.
If other devices were discovered but not activated, they are returned to the
undiscovered state.
[3] Delete a Device Use this option to delete a known device from the system:
– Press [1] to delete a point, or [3] to delete an output.
– Enter the desired point number or output number.
If the selected point number corresponds with a relay module, both the
input and output are deleted from the system. If you only want to delete the
input or the output, you must disable the corresponding function through
programming.
– Press [1] to delete the device.
The wireless hub deletes the device from the system, and the point type or
output function is set to 0 (Disabled).
[4] Transfer Wireless Data
(control panel-to-hub)
If you replace a hub, select this option to send wireless data from the control
panel to the wireless hub.
[5] Transfer Wireless Data
(hub-to-control panel)
If you replace the control panel, select this option to send wireless data from
the wireless hub to the control panel. This option deletes key fobs.